Menu
Search

Shop By Truck

Specials
DFC Tow Haul GM Duramax Complete Long Block
Bilstein Shock Install Special

2033137 BD Exhaust Brake Kit - Turbo Mount - Dodge 1998.5-2002

SKU: BD2033137
Manufacturer: BD Diesel Performance
1998.5-2002 Dodge 5.9L Cummins 24V - Turbo Mount / Vacuum Actuated. Avoid costly repairs from brake system damage from descending grades with a load with the BD Exhaust Brake. BD’s exclusive Variable Butterfly Technology provides peak retarding power throughout the engine’s RPM range to help slow your rig down safely.

PRODUCT DETAILS (click to expand)

Mftr. Part# 2033137
UPC 019025002753
Weight (lbs.): 14.50 lbs.
Dimensions: 7.80" x 18.50" x 9.80"

PRODUCT SPECS (click to expand)

Product Type Exhaust Brake
Exhaust Brake Mount Turbo Mount
$1,576.00 (CAD)
Installation Manuals

NOTE: TRUCKS WILL AUTOMATIC TRANSMISSIONS WILL REQUIRE EITHER AN AUTOLOC OR A TORQLOC ALONG WITH THIS BRAKE KIT. SEE RELATED PRODUCTS BELOW.

Overview

Descending grades with trailers can be hazardous and lead to tricky situations, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven VARIABLE REGULATING BACK-PRESSURE EXHAUST BRAKE.

Controlled by a dash-mounted On/Off toggle switch or optional stick-mounted rocker switch for manual transmissions, the BD brake communicates with the engine’s electronic idle verification board for quick engagement.

All BD Brake kits come complete with the brake, air compressor (where applicable), mounting hardware, port to monitor the brake’s retarding performance, complete instructions and most models come with a pre-drilled and tapped EGT port for a pyrometer probe if desired.

The brake valve is actuated by a powerful, three-inch vacuum cylinder.

How it works

Using BD’s exclusive Variable butterfly Technology, providing peak retarding power throughout the engine’s rpm range unlike some models that rely on a hole/orifice within the butterfly to calibrate back-pressure only in the higher engine RPM.

Where it mounts

Most vehicle applications will either have BD’s turbo-mount design which bolts in place of the factory elbow between the turbo and the exhaust system or the inline design mounts in the exhaust system between the engine and muffler/DPF/cat. 

Advantages of Butterfly Regulation

The advantage to regulating the butterfly vs. other brands is: The Butterfly is constantly exercising thus reducing the possibility of carbon and rust deposit forming that can cause premature ware and binding. Furthermore no maintenance or lubricating is required providing miles of trouble free service.

The BD Brake’s rugged cast-iron housing incorporates BD’s exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding.

The stainless steel butterfly shaft has proven to stand up under the harsh, high-heat conditions of the exhaust environment. The offset butterfly valve won’t stick and has been strategically placed in the elbow so that it won’t impede exhaust flow when in the open position.

Trucks With Automatic Transmissions (Important)

Automatic-equipped trucks prior to 2006 require BD’s programmable AutoLoc and PressureLoc kits to electronically control torque converter clutch engagement. This addition effectively reduces slippage, resulting in peak retarding performance as well as lower transmission temperatures.

Documents & Articles
Customers who bought this item also bought

BD AutoLoc Transmission Control Kit - Dodge 1994-2005 / Ford 1988-2003

SKU: BD1030390
$418.00 CAD
The BD AutoLoc commands the torque converter to lock up, and stay locked up, any time the exhaust brake is applied in third and fourth gears. This not only helps with engine braking, but because there’s no clutch slippage, transmission oil temperatures remain low.

MBRP 4" Turbo Back Exhaust - Stainless WM/WT Dodge 1994-2002

SKU: MBS6100409
$654.99 CAD
MBRP's 4" Turbo Back XP Series Exhaust System for your 1994-2002 Dodge Cummins 5.9L diesel pickup. Made from 16 gauge T409 stainless steel (which lasts longer than aluminized exhaust), this kit comes with a T304 polished stainless muffler and exhaust tip.