BDS1549H BDS Suspension 2.5" Radius Arm Lift Kit - Ford 6.7L Powerstroke 2020-2022 (W/ BDS Shocks)

Overview

From BDS Suspension comes their 2.5 Lift Kit w/ Radius Arm Kit. These kits use full length ProRide coil springs designed to improve the stance of your Super Duty while taking performance, capability and ride quality to the next level with clearance for 35in tires. In place of the factory stamped steel arms this kit upgrades to heavy duty BDS radius arms. These heavy duty arms are built from 1-3/4in OD heavy wall tubing, fully welded with gussets for superior strength to the factory units light weight stamped steel units they are replacing.

At the frame mount a large OE-style rubber bushing is used to better isolate of NHVs and allow for quiet operation without any need for maintenance. These bushings offer superior durability and quieter operation than arms with heims and flex joints.

Also upgraded is a high strength replacement track bar designed to recenter the front axle with the lift installed. This new track bar is adjustable, built from 1-3/8in solid steel stock with gusseted ends and a fine thread center turnbuckle with pinch bolts. The track bar comes pre-assembled and ready to bolt into the factory location to adjust to length.

Rounding out the front of these kits are front brake line relocation brackets to allow enough slack in the lines to cycle the suspension offroad while the sway bar relocation brackets to correct sway bar operating angle for optimal performance without sacrificing approach angle. In the rear, these kits use a 1in bolt-on lift block and e-coated u-bolts to level stance while retaining the factory rear springs for ride quality and tow capacity. Finishing out the rear are a pair of BDS NX2 gas shocks.

Note

• Although this is pictured with Fox Shocks, this kit will come equipped with BDS NX2 Shocks. If you would like fox shocks, please contact us.

Kit Components

• BDS013261: Front Box Kit X1
• BDS013108: Rear Block Kit X1
• BDS123251: Radius Arm Upgrade X1
• BDS033251: Coil Springs X1
• BDS85717: NX2 Shock Absorber X2
• BDS85720: NX2 Shock Absorber X2