BDS699FS BDS Suspension 4" Lift Kit - Dodge 6.7L Cummins 2013-2018 3500 (W/ Fox Shocks)

Overview

The lift is designed around the relocation of the factory radius arm in order to correct suspension and steering geometry to work with 6" of lift. The radius arms are relocated with a uniquely designed bracket that mixes the ease of installation you get with an adapter-type bracket with the strength and durability of a full replacement radius arm mount bracket. The new relocation bracket ties into both the factory radius arm frame mount and the side of the frame rail. At the frame, the new mount is fastened with specially machined sleeves and threaded inserts. In addition to the radius arm relocation, the kit includes everything else to properly lift the Ram 3500s. Track bar relocation, dropped pitman arm and brake line relocation hardware position all the steering and brake components properly to work with the added ride height provided by the new progressive rate, full replacement coil springs. In the front, sway bar relocation brackets drop the sway bar at the frame to correct the sway bar angle and allow use of the factory sway bar links. New 6in progressive rate coil springs provide the correct ride height and great on/off road ride quality. The ability to adjust the transmission mount height is an added bonus and nice "fine-tuning" feature. The rear of the truck is lifted via a 5in block and u-bolt system which provides a level-to-slightly tail high stance.

Notes

• Minor amount of welding is required

Kit Components

• BDS012516: Dodge 5in Rear Block Kit X1
• BDS012610: 13 3500 Ram 6in Front Box Kit X1
• BDS032602: 13-18 Ram 3500 - 14-18 Ram 2500 6in Coil X1
• BDS122623: 13 3500/14 2500 Ram T-Case Index- 6 Bolt X1
• FOX98224752: FOX 2.0 Shock Absorber X2
• FOX98224761: FOX 2.0 Shock Absorber X2