Shop By Truck

Service Department

HD170201T EcoDiesel Tuner

SKU: HD170201T
In order to modify the emissions systems in your EcoDiesel, you typically had to send your ECM away to get flashed - leaving your truck down for weeks! Not anymore with the HD Diesel Handheld ECM Tuner. *NOTE: THIS IS A NON REFUNDABLE PURCHASE

PRODUCT DETAILS (click to expand)

Mftr. Part# HD170201T

PRODUCT SPECS (click to expand)

Product Type ECM (Engine Control Module)
Emissions Delete Capable Yes
Offroad Use Only Yes



8 Digit Cummins Engine Serial Number Required when orderig Head Gasket p/n 4932210.

Serial Number is located on the top/rear of Valve Cover on 6.7L Cummins Engines.


Vehicle 17 Digit VIN Number Is Required.


Contact your local dealer, provide him with your VIN number and request the rear end gear ratio. This is an important step - do not just guess.

*Unlock Cable Required for 2018-2019 Model Years


To purchase this product, you must accept the terms of the OFFROAD RACE-ONLY DISCLAIMER. Click HERE to view.

$1,649.00 (CAD)

There are now out-of-the-box tuners available for reprogramming the Dodge Ram 1500 EcoDiesel. Traditional meathods required replacement of the ECM and sending it away for programming, leaving your vehicle without a stock tuned PCM.

With HD Diesel, you do not need to replace the PCM or permanently modify the factory tune files. Once the tuner has arrived the tuning process is as follows....

The required vehicle information will need to be extracted from the current ECM simply using the new handheld tuner. Once the vehicle specific tuning files are obtained they will then need to be emailed back to BC Diesel to have the tuning built to your specifics. After the tuning is created it will be emailed back to you to then be installed into the handheld tuner, which can then be uploaded to the trucks ECM via the OBDII port.