Probes and Accessories

Universal - Monitor data such as Boost PSI, Fuel Rail Pressure, Air Bag Pressure, Lift Pump Pressure, Pre/Post Intercooler Pressure and many more. Plugs directly into Edge’s Accessory System (EAS) for direct monitoring with your CTS/CTS2 display monitor. The EAS Universal Sensor Input kit is required for installation (Not included).

The Edge EAS Temperature Sensor is a -40°F to 300°F 1/8” NPT sensor & wire assembly supplied with the connectors to plug directly into Edge’s Accessory System (EAS) for direct monitoring with your CTS/CTS2 display monitor. The EAS Universal Sensor Input kit is required for installation (Not included).

The EAS Universal Sensor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS/CTS/CS2/CTS2. This means you can add custom temperature, pressure, Air/Fuel and even Travel/Position gauges!

Universal (Except 2006-2012 Dodge Applications)

The Edge accessory (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy-chain style to Edge's CS2/CTS2 products. A starter kit (standard with Juice CS2/CTS2 kits, optional with all others) is required to install this pyrometer.

Edge's EAS Expandable EGT Probe allows you to monitor exhaust gas temperatures with your CS/CTS/CS2/CTS2 product line. The EAS is designed to allow you to add optional expandable accessories from Edge Products such as pressure and temp sensors. This re-designed version of the original EAS Starter Kit EGT Probe, is built with a 15" lead so that the EGT Probe can be easily replaced, or removed without needing to replace the cable or other electronics.

Universal

2013-2018 Dodge 6.7L Cummins - This unlock cable is designed for use with existing Edge Insight CTS2's on 2013+ Dodge applications. If you have an existing Insight CTS2 (PN 84130), you will need to purchase this cable and contact Edge to update your device.

This unlock cable is designed for use with existing EZ Lynk 2 for your Dodge 6.7L pickup.

2019-2020 Dodge 6.7L Cummins - This unlock cable is designed for use with existing EZ Lynk on 2019/2020 Dodge applications.

2016-2019 Nissan Titan XD - This unlock cable is designed for use with existing EZ Lynk on 2016-2019 Nissan Titan Diesel applications.

Replacement power cable that is used for switched power connections. This cable can be used with any Bully Dog, H&S Mini Maxx or Black Maxx tuners.

Replacement OBD-II junction/control box for any Bully Dog, H&S Mini Maxx or Black Maxx tuners.

Edge Products OBD-II to HDMI Cable

Replacement high-speed data HDMI cable that is connected between the OBD-II control box and the back of the tuner. This cable can be used with any BullyDog, H&S Mini Maxx or Black Maxx tuners.

Do you have two accessories fighting for your OBD-II diagnostic port? If so, use this Plug-n-Play Pass-Through Wiring Harness as a splitter so that you can use both at the same time.

Daystar's NO FLASH PLUGS provide an effective way to preserve the tune on your diesel or other custom tuned ride. Protect your custom tune with Daystar!

2010-2021 Dodge 6.7L / 2016+ Nissan Titan XD 5.0L Cummins - Shift tunes on-the-fly with your EFILive or EZ Lynk tuning with this control switch kit. Tuning device not included.

2011-2019 Ford Powerstroke 6.7 & 3.0L - Shift tunes on-the-fly with your EZ Lynk tuning with this control switch kit. Tuning device not included.

2007.5-2010 GM Duramax 6.6L LMM/LBZ - Shift tunes on-the-fly with your EFILive or EZ Lynk tuning with this DSP5 control switch. Tuning not included.

2011-2016 GM Duramax 6.6L LML - Shift tunes on-the-fly with your EFILive or EZ Lynk tuning with this DSP5 control switch. Tuning not included.

2011-2019 Ford Powerstroke 6.7L - This PCM plug from Shibby Engineering is used if removing the emissions wiring harness during emissions systems modifications.

The Edge ECM connector repair kit replaces all four sliders in the two ECM wiring harness connectors in your 2017-2022 6.6L Duramax truck.

Access the newest tunes for your vehicle by connecting your computer directly to the OBDll port with this update cable.

The EZ LYNK Titan Cable allows full Diagnostic Function Capability on the Titan XD equipped with the Cummins 5.0L Engine.

Auto Agent 3 Legacy Adapter Cable Adapts any Auto Agent 2 Cable to the Auto Agent 3

EZ LYNK OBDII Diagnostic Cable with 18+ RAM SGM Adapter Auto Agent 3. Designed for your 2018 and up RAM 2500/3500 Trucks.

The EZ Lynk Auto Agent 3 Titan Cable Bundle allows full Diagnostic Function Capability on the Titan XD equipped with the Cummins 5.0L Engine.

RaceMe's replacement OBD (on-board diagnostics) cable

GDP CAN Plug 20 - 2020-2023 6.6L Duramax L5P Diesel Silverado & Sierra 2500HD & 3500

GDP "CAN" Plug 10 - 2020-2023 6.6L Duramax L5P Diesel Silverado & Sierra 2500HD & 3500

The Edge EAS Shift On-The-Fly Accessory gives you the ability to change custom tunes on your insight CS2, CTS2 or CTS3 monitor while riving your 2011-2016 6.6L Duramax.

Diesel Switch by HP Tuners lets you power up from a stock calibration to one of five custom maps with the turn of a switch. Pair with HP Tuners’ Switch on the Fly OS for complete control and performance of your diesel.

Shibby Harness' CCV Harness Plug will will cap up the harness interface for the removed components in your 2011-2021 6.7L Powerstroke Ford

Shibby Harness' Universal DEF Plug will stop dribbling, leakage or debris ingress into the line.

Shibby Harness' Universal Duramax EGR Temp Sensor Harness Plug

Shibby's SOTF CCV Harness Tuning Cap Plug for your 2010-2020 6.7 Cummins diesel.

Shibby's SOTF Tuning Harness Plug for your 2011-2014 6.7 Powerstroke diesel.

Shibby's SOTF Tuning Harness Plug for your 2020-2023 6.7 Powerstroke diesel.

Shibby's EBP Harness Plug for your 2007.5-2020 6.7L Cummins truck.