Probes and Accessories

Protect your wiring from the open elements and provide a cleaner look when removing emissions components with Shibby Engineering's tuner harness plug for your 2007-2018 Dodge Cummins 6.7L truck.

Protect your wiring from the open elements and provide a cleaner look when removing emissions components with Shibby Engineering's tuner harness plug kit for your 2013-2015 Dodge Cummins 6.7L truck.

Protect your wiring from the open elements and provide a cleaner look when removing emissions components with Shibby Engineering's tuner harness plug kit for your 2016-2018 Dodge 6.7L Cummins Ram w/EFI.

Protect your DEF wiring and connections from the open elements and provide a cleaner look when removing emissions components with Shibby Engineering's DEF Delete plug kit for your 2010-2015 Dodge Cummins 6.7L.

Protect your DEF wiring and connections from the open elements and provide a cleaner look when removing emissions components with Shibby Engineering's DEF Delete plug kit for your 2016+ Dodge Cummins 6.7L.

Monitor your EGT/Pyro temps on your Bully Dog GT or Watchdog tuner with the Bully Dog Sensor Docking Station. Pyro probe included. Also compatible with H&S Mini Maxx tuners.

Replacement pyrometer thermocouple probe for the Bullydog Sensor Docking Stations (pyrometer) used in the Triple Dog GT and other modern Bullydog tuners.

The SCT EGT Sensor Kit allows you to monitor exhaust gas temperatures with your SCT devices. This sensor is plug & play and easy to install, featuring a stainless steel EGT probe and is RFI-shielded for accurate monitoring.

Control your RaceME Ultra, EFILive, or other compatible modules connected to your 2006-2016 Dodge Cummins truck with SoCal Diesel's CSP5 (Cummins Switchable Tuning - 5 power levels) switch. The pass through style configuration allows you to connect other OBD-II-based products while still maintaining use of the CSP5 switch.

Control your RaceME Ultra, EFILive, or other compatible modules connected to your 2006-2016 Dodge Cummins truck with SoCal Diesel's CSP5 (Cummins Switchable Tuning - 5 power levels). This 90 degree cable connects neatly and discreetly to the truck's OBD-II diagnostic port.

Unlock the potential of your 2018-2021 Dodge Cummins 6.7L diesel truck with the Bully Dog Cummins ECM unlock cable - for use with Bully Dog BDX Diesel performance tuners.

Unlock the potential of your 2013-2017 Dodge Cummins 6.7L diesel truck with the Bully Dog/H&S Cummins ECM unlock cable - for use with Bully Dog GT Diesel and H&S Mini Maxx performance tuners.

Unlock the potential of your 2018-2021 Dodge Cummins 6.7L diesel truck with the Bully Dog/H&S Cummins bypass cable - for use with Bully Dog GT Diesel and H&S Mini Maxx performance tuners.

The Edge accessory (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories (such as temperature/pressure sensors, turbo timer, etc.) via daisy-chain style to Edge's CS/CTS/CS2/CTS2 systems. This kit is the starter cable that is required if you do not have a Juice CS/CTS2.

Universal - Monitor data such as Boost PSI, Fuel Rail Pressure, Air Bag Pressure, Lift Pump Pressure, Pre/Post Intercooler Pressure and many more. Plugs directly into Edge’s Accessory System (EAS) for direct monitoring with your CTS/CTS2 display monitor. The EAS Universal Sensor Input kit is required for installation (Not included).

The Edge EAS Temperature Sensor is a -40°F to 300°F 1/8” NPT sensor & wire assembly supplied with the connectors to plug directly into Edge’s Accessory System (EAS) for direct monitoring with your CTS/CTS2 display monitor. The EAS Universal Sensor Input kit is required for installation (Not included).

The EAS Universal Sensor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS/CTS/CS2/CTS2. This means you can add custom temperature, pressure, Air/Fuel and even Travel/Position gauges!

Universal (Except 2006-2012 Dodge Applications)

The Edge accessory (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy-chain style to Edge's CS2/CTS2 products. A starter kit (standard with Juice CS2/CTS2 kits, optional with all others) is required to install this pyrometer.

Edge's EAS Expandable EGT Probe allows you to monitor exhaust gas temperatures with your CS/CTS/CS2/CTS2 product line. The EAS is designed to allow you to add optional expandable accessories from Edge Products such as pressure and temp sensors. This re-designed version of the original EAS Starter Kit EGT Probe, is built with a 15" lead so that the EGT Probe can be easily replaced, or removed without needing to replace the cable or other electronics.

Universal

2013-2018 Dodge 6.7L Cummins - This unlock cable is designed for use with existing Edge Insight CTS2's on 2013+ Dodge applications. If you have an existing Insight CTS2 (PN 84130), you will need to purchase this cable and contact Edge to update your device.

This unlock cable is designed for use with existing EZ Lynk 2 for your Dodge 6.7L pickup.

Replacement power cable that is used for switched power connections. This cable can be used with any Bully Dog, H&S Mini Maxx or Black Maxx tuners.

Replacement OBD-II junction/control box for any Bully Dog, H&S Mini Maxx or Black Maxx tuners.

Replacement high-speed data HDMI cable that is connected between the OBD-II control box and the back of the tuner. This cable can be used with any BullyDog, H&S Mini Maxx or Black Maxx tuners.

2010-2021 Dodge 6.7L / 2016+ Nissan Titan XD 5.0L Cummins - Shift tunes on-the-fly with your EFILive or EZ Lynk tuning with this control switch kit. Tuning device not included.

EZ LYNK OBDII Diagnostic Cable with 18+ RAM SGM Adapter Auto Agent 3. Designed for your 2018 and up RAM 2500/3500 Trucks.

Shibby's SOTF CCV Harness Tuning Cap Plug for your 2010-2020 6.7 Cummins diesel.

Shibby's EBP Harness Plug for your 2007.5-2020 6.7L Cummins truck.