Engine Parts & Upgrades

This is a brand new High Pressure Stand Pipe for your 2003-2004 Ford 6.0L Powerstroke. This is the updated design which includes the addition of a white PTFE washer. 2 required for each engine.

An OEM replacement High Pressure Rail Plug (Dummy Plug) for your 2004 - 2007 Ford Powerstroke 6.0L. This is the updated design which includes the white PTFE washer/seal.

This is a brand new OEM replacement High Pressure Pump Connector with Snap-To-Connect fitting for your 2004 - 2007 Ford 6.0L Powerstroke. It is designed to support the branch tube and eliminate the possibility of the fitting to become separated.

Mahle VS50395 Valve Cover Gasket Set is a direct replacement for your 2003-2007 Ford 6.0L Powerstroke.

2003-2007 Ford Powerstroke 6.0L - When replacing the valve cover gasket on your 6.0L Powerstroke, use a genuine Ford/Motorcraft OEM replacement valve cover gasket for 100% piece of mind.

2008-2010 Ford Powerstroke 6.4L - When replacing the left-hand side valve cover gasket on your 6.4L Powerstroke, use a genuine Ford/Motorcraft OEM replacement valve cover gasket for 100% piece of mind.

2008-2010 Ford Powerstroke 6.4L - When replacing the right-hand side valve cover gasket on your 6.4L Powerstroke, use a genuine Ford/Motorcraft OEM replacement valve cover gasket for 100% piece of mind.

2003-2004 Ford 6.0L Powerstroke Injection Control Pressure Sensor 3C3Z-9F838-EA is a genuine OEM Ford replacement for the Injection Control Pressure Sensor in your 2003-2004 6.0L Powerstroke, it is manufactured to meet or exceed the specifications of the original sensor and is thoroughly calibrated to ensure accurate readings. This ICP sensor is located under the turbo

2004-2007 Ford 6.0L Powerstroke Injection Control Pressure Sensor 4C3Z-9F838-A is a genuine OEM Ford replacement for the Injection Control Pressure Sensor in your 2004-2007 6.0L Powerstroke, it is manufactured to meet or exceed the specifications of the original sensor and is thoroughly calibrated to ensure accurate readings. This ICP sensor is located under the turbo

1999-2003 Ford 7.3L Powerstroke - If you need to replace your ICP Sensor, then replace it with the parts that were designed for your vehicle. This Motorcraft ICP sensor is a genuine factory OEM replacement.

1999-2007 Ford 7.3L/6.0L Powerstroke Injection Control Pressure & Exhaust Back Pressure Sensor Harness

2008 - 2010 Ford 6.4L Powerstroke - This is a replacement DPF (Diesel Particulate Filter) Temperature Sensor

Genuine OEM rocker carrier gasket for your 6.0L Ford truck.

2008 - 2010 Ford 6.4L Powerstroke - This is a replacement EGR (Exhaust Gas Recirculation) Temperature Sensor for the right-hand side up-pipe

OEM Motorcraft direct replacement transmission temperature sensor Ford 6.0L/6.4LPowerstroke 2003-2010 diesel pickup.

Reseal the exhaust manifolds in your 2003-2007 Ford 6.0L Powerstroke with the Ford 6C3Z-9448-A Exhaust Manifold Gasket.

2003-2010 Ford Powerstroke 6.0/6.4L - When removing and/or replacing your transmission, you'll need to replace your rear main seal when re-assembling. Make sure you replace the rear main seal with a genuine Ford/Motorcraft OEM factory replacement for piece-of-mind.

2011-2017 Ford Powerstroke 6.7L - When removing and/or replacing your transmission, you'll need to replace your rear main seal when re-assembling. Make sure you replace the rear main seal with a genuine Ford/Motorcraft OEM factory replacement for piece-of-mind.

1994-2003 Ford Powerstroke 7.3L - When removing and/or replacing your transmission, you'll need to replace your rear main seal when re-assembling. Make sure you replace the rear main seal with a genuine Ford/Motorcraft OEM factory replacement for piece-of-mind.

Motorcraft Oil Filler Cap - Ford OEM 2003-2007, Genuine OEM Oil Cap for your 6.0L Truck

Ford's Engine Oil Dipstick for your 7.3L Powerstroke Diesel 1999-2003.

Ford's Engine Oil Dipstick Tube for your 6.0L Powerstroke Diesel 2003-2007.

Ford's Engine Oil Dipstick Tube for your 7.3L Powerstroke Diesel 1999-2003.

Ford's Engine Oil Dipstick for your 2003-2004 6.0L Powerstroke

Ford's Engine Oil Dipstick for your 2004.5-2007 6.0L Powerstroke

Ford's Engine Oil Dipstick for your 2008-2010 6.4L Powerstroke

Ford's Engine Oil Dipstick for your 2011-2016 6.7L Powerstroke

Ford's Engine Oil Dipstick Tube O-Ring for your 2008-2010 6.4L Powerstroke

Ford's Engine Oil Dipstick Tube for your 2008-2010 6.4L Powerstroke

Ford's Engine Oil Dipstick Tube for your 2011-2016 6.7L Powerstroke

The Ford Motorcraft 6.0L 18mm Head Gasket kit is a factory replacement for your 2003-2007 Powerstroke truck.

The Ford Motorcraft 6.0L Head Gasket kit is a factory replacement for your 2005-2007 Powerstroke truck.

Replacement high pressure oil pump discharge tube for your 2003 6.0L Ford truck.

OEM Motorcraft Fuel Rail Pressure Sensor for your 2017-2019 6.7L Powerstroke truck.

Genuine OEM Motorcraft oil filter tube assembly for your 6.0L Ford pickup.

Motorcraft Fan Clutches are designed and tested to meet OE specifications for durability and reliability under extreme conditions.

2003-2004 Ford Powerstroke 6.0L F250, F350, F450, F550 - This replacement OEM Exhaust Back Pressure (EBP) Tube from Motorcraft is made to meet or exceed OEM specifications at a price that you can afford.

2004.5-2005 Ford Powerstroke 6.0L F250, F350, F450, F550 - This replacement OEM Exhaust Back Pressure (EBP) Tube from Motorcraft is made to meet or exceed OEM specifications at a price that you can afford.

2005-2007 Ford Powerstroke 6.0L F250, F350, F450, F550 - This replacement OEM Exhaust Back Pressure (EBP) Tube from Motorcraft is made to meet or exceed OEM specifications at a price that you can afford.

2008-2010 Ford Powerstroke 6.4L F250, F350, F450, F550 - This replacement OEM Exhaust Back Pressure (EBP) Tube from Motorcraft is made to meet or exceed OEM specifications at a price that you can afford.