Chercher
filterproduct.shopbytruck
headerfilter.filterproducts

Filtrer par Camion

25-311921 Bilstein 5160 Shock Absorber Front - Dodge Ram 6.7L Cummins 3500 4WD - 2013-2023 Lifted 2"-2.5"

SKU: BIL25-311921
Référence fabricant: 25-311921
Fabricant: Bilstein Shocks
Replace the worn out or leaking shock absorbers on your truck with the Bilstein 25-311921 B8 5160 Series Shock Absorber. Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUV's.

Détails du Produit (cliquez pour afficher)

Spécifications produits

$372.60

Overview

Replace the worn out or leaking shock absorbers on your truck with the Bilstein 25-311921 B8 5160 Series Shock Absorber. Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUV's. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360-degree swivel banjo hose fitting, providing a clean, low-profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.

Features

  • Zinc Plated Finish
  • Monotube Construction
  • Fade Free Performance
  • Digressive Piston
  • 360 Degree Swivel Fitting
  • Remote Reservoir

Application Notes

  • 4WD Only; For Front Lifted Height: 2-2.5"

Specifications

  • Collapsed Length 15.04in
  • Extended Length 22.68in
  • Collapsed Length 382.0mm
  • Extended Length 576.0mm
  • Reservoir - Yes
  • Billet Reservoir Clamp Included - Yes
  • Body Design Smooth Body Non-Coilover
  • Body Diameter 46mm
  • Spring Seat Included No
  • Adjustable Damping Non-Adjustable
  • Quantity per Vehicle 2
  • Position Front 

Note: *Lift Height is suggested by mfg. Due to the many different aftermarket suspension systems it is recommended that a measurement is taken for proper application. A pin to eye shock is measured from the base of the stem where the mounting hardware rests to the center of the eyelet. Shock Absorbers sold individually.