EGR Supprimer Kits et Refroidisseurs

If you are looking to remove your EGR valve and cooler from your 2008-2010 Ford Powerstroke, then this stylish kit from Mel's Manufacturing is for you. Note that installation of the intake manifold requires special tuning that is not compatible with SCT Livewire, Mini Maxx or XRT Pro tuners.

If you are looking to remove the EGR cooler but leave your EGR valve intact from your 2008-2010 Ford Powerstroke, then this stylish kit from Mel's Manufacturing is for you!

Mel's Manufacturing polished 304 Stainless Steel up-pipes with reinforced interlocking braid flex bellows for your 2008-2010 Ford Powerstroke 6.4L. Both driver side and passenger side up-pipes with gaskets. Also includes EGR/Cooler blocks and polished intake elbow.

Eliminate the problematic EGR valve and cooler with this high quality, low cost delete kit for your 2007-2009 Dodge Cummins 6.7L 2500/3500 diesel.

Eliminate the problematic EGR valve and cooler with this high quality, low cost delete kit for your 2010-2012 & 2019-2021 Dodge Cummins 6.7L 2500/3500 diesel. Race tuning required.

2013-2018 Dodge Cummins 6.7L - Eliminate the problematic EGR valve and cooler with this high quality, low cost delete kit. Race tuning is required.

Eliminate the problematic EGR valve and cooler with this high quality, low cost delete kit for your 2011-2014 and 2017-2019 Ford 6.7L Powerstroke - Works with Factory or Aftermarket Pyrometer. Race tuning required.

Eliminate the problematic EGR valve and cooler with this high quality, low cost delete kit for your 2020-2022 Ford 6.7L Powerstroke. Race tuning required.

Eliminate the problematic EGR valve and cooler with this high quality, low cost delete kit for your 2004.5-2005 GMC/Chevy Duramax 6.6L LLY diesel. Race tuning required.

Eliminate the problematic EGR valve and cooler with this high quality, low cost delete kit for your 2006-2007 GMC/Chevy Duramax 6.6L LBZ diesel. Race tuning required.

Eliminate the problematic EGR valve and cooler with this high quality, low cost delete kit for your 2007.5-2010 GMC/Chevy Duramax 6.6L LMM pickup. Race tuning required.

Eliminate the problematic EGR valve and cooler with this high quality, low cost delete kit for your 2011-2016 GMC/Chevy Duramax 6.6L LML pickup. Race tuning required.

Eliminate the problematic EGR cooler with this high quality, low cost delete kit for your 2017-2021 GMC/Chevy Duramax 6.6L L5P pickup. Race tuning required.

Replace your faulty EGR Valve on your GMC/Chevy 6.6L Duramax 2011-2016 with a Genuine OEM EGR Cooler Bypass Valves

Eliminate the problematic EGR valve and cooler with this high quality, low cost delete kit for your 2008-2010 Ford 6.4L Powerstroke diesel. Comes with intake manifold. Race tuning required.

Eliminate the problematic EGR valve and cooler with this high quality, low cost delete kit for your 2003-2007 Ford Powerstroke 6.0L pickup. Completely replaces factory EGR giving you quicker turbo spool and lower EGT's.

Eliminate the problematic EGR valve and cooler with this high quality Mel's Manufacturing EGR Valve & Cooler Delete Kit for your 2007.5-2017 Dodge 6.7 Cummins 2500/3500 pickup. Race tuning required.

Eliminate the problematic EGR valve and cooler with this high quality Mel's Manufacturing EGR Valve & Cooler Delete Kit for your 2013-2018 Dodge Cummins 6.7L 4500/5500 Cummins Cab & Chassis diesel. Race tuning required.

Looking for just the plates to block off the EGR on your 2011-2019 Ford 6.7L Powerstroke? Look no further.

This will remove the EGR Cooler, manifold pipes, coolant lines, and all EGR related electronics from your truck. Comes with all necessary block off plates, plugs, clamps, etc. Fits your 2011-2014 & 2017-2019 Ford 6.7L Powerstroke - Uses stock pyro probe. Race tuning required.

Mel's Manufacturing high quality EGR Delete kit designed for 2015-2016 Ford 6.7L Powerstroke diesels. Pre-tapped 1/8" NPT plates for easy pyro probe installation.

Mel's Manufacturing EGR Blockoff plate for your 2013-2017 Dodge Cummins 6.7L 3500/4500/5500 Cab & Chassis trucks (will not fit pickups).

Block-off plates for the EGR system for your 20010-2012 Dodge Cummins 6.7L Cab & Chassis

Mel's Manufacturing Block-off plates for the EGR system for your 2007.5-2018 Dodge Cummins 6.7L 2500/3500 diesel.

Mel's Manufacturing EGR valve and EGR cooler delete kit for your 2007.5-2009 Dodge 6.7L Cummins 2500/3500 pickup and 4500/5500 Cab & Chassis diesel truck. Includes block off plates, brackets, and all gaskets and hardware needed to complete the installation.

Mel's Manufacturing EGR valve and EGR cooler delete kit for your 2010-2021 Dodge 6.7L Cummins 2500/3500 diesel truck (PICKUP ONLY). Includes block off plates, brackets, and all gaskets and hardware needed to complete the installation.

Mel's Manufacturing EGR valve and cooler delete kit for your 2018-2020 Ford F150 Powerstroke 3.0L diesel truck. Includes block off plates and hardware needed to complete the installation.

2003 - 2003 Ford 6.0L Powerstroke ($150.00 Refundable Core Charge Will Apply)

2004 - 2007 Ford 6.0L Powerstroke ($70.00 Refundable Core Charge Will Apply)

Bulletproof Diesel 6.0L EGR and Oil cooler with H-Core technology 2004-2007 Ford 6.0L Powerstroke ($50.00 Refundable Core Charge Will Apply)

Bulletproof Diesel 6.0L EGR cooler with H-Core technology 2004-2007 Ford 6.0L Powerstroke ($75.00 Refundable Core Charge Will Apply)

2008 - 2010 Ford 6.4L Powerstroke ($70 core charge will be applied)

2008 - 2010 Ford 6.4L Powerstroke ($70 core charge will be applied)

2007.5-2010 GM 6.6L Duramax LMM - Flo~Pro's laser cut stainless steel EGR blocker plate installs in roughly 30 minutes with normal hand tools. Race tuning required.

2008-2010 Ford 6.4L Powerstroke - Mel's Manufacturing's laser cut stainless steel EGR blocker plate installs in roughly 30 minutes with normal hand tools. Race tuning required.

2004-2006 GM 6.6L Duramax LLY LBZ - When removing the EGR cooler from your vehicle, Mel's Manufacturing's laser cut stainless steel EGR blocker plate is used to cap off the port that the cooler was connected to. Installs in roughly 30 minutes with regular hand tools. Race tuning required.

2011-2016 GM 6.6L Duramax LML - Mel's Manufacturing's laser cut stainless steel EGR blocker plates are used when removing the EGR cooler. Race tuning required.

2017-2019 GM 6.6L Duramax L5P - Mel's Manufacturing's EGR Delete kit for off-road /race use comes with everything needed to get rid of the stock system in your diesel truck.

2009-2018 Dodge Cummins 6.7L - BD's EGR Race Delete Kit includes EGR Valve and Cooler block off plates, gaskets and hardware. Includes exhaust/intake cover supports to allow re-installation of the engine cowling, and a support bracket for the existing coolant tube to prevent vibration.

2003 - 2007 Ford 6.0L Powerstroke