Chercher
Shop by truck
Filter products

Filtrer par Camion

25-311792 Bilstein 5160 Shock Absorber Front - Ford F-250/350 2005-2024 0-2.5" Lift

SKU: BIL25-311792
Référence fabricant: 25-311792
UPC: 651860898407
Fabricant: Bilstein Shocks
The Bilstein 5160 Series Shock Absorber 25-311792 that are a direct fit for your 2005-2024 Ford F-250/350 4WD Pickup.

Détails du Produit (cliquez pour afficher)

Spécifications produits

$372.60

Overview

Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting, providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.

Specifications

  • Collapsed Length (IN)13.17
  • Extended Length (IN)21.01
  • Collapsed Length (MM)334.5
  • Extended Length (MM)533.7
  • FinishZinc Plated
  • ReservoirYes
  • Billet Reservoir Clamp IncludedYes
  • Body DesignSmooth Body (Non-Coilover)
  • Body Diameter46mm
  • Spring Seat IncludedNo
  • Adjustable DampingNon-Adjustable

Application Note : Ford F-250 Super Duty 2024-2005, F-350 Super Duty 2024-2005

Note:  Lift Height is suggested by mfg. Due to the many different aftermarket suspension systems it is recommended that a measurement is taken for proper application. A pin to eye shock is measured from the base of the stem where the mounting hardware rests to the center of the eyelet. Shock Absorbers sold individually.

Note

Due to the variety of aftermarket suspension systems, it is recommended to take precise measurements to ensure proper shock fitment. For a pin-to-eye shock, the correct measurement should be taken from the base of the stem, where the mounting hardware rests, to the center of the eyelet.