The Bullet Proof Diesel Billet Water Pump is designed for maximum durability. It features an aluminum impeller in place of the OEM plastic impeller, top of the line bearing assembly, top-grade seal and an all-billet precision machined housing. This stronger impeller resists cracking along the hub helping to prevent impeller failures, overheating engines and expensive repairs. The aluminum impeller is also stiffer and stronger and therefore less likely to flex under heavy loads, leading to less cavitation and less erosion within the front cover. The billet housing is strong and more precise than a typical water pump cast housing.
A mechanical fan clutch and fan clutch adapter allows you to install a non-electrical fan clutch on the Ford 6.0L diesel!
This combination of fan clutch and adapter allow you to use a 6.0L fan blade assembly with a mechanical/thermal fan clutch. This combination works very well for those that require heavy duty cooling needs.
Please note - that installation of a mechanical fan clutch does NOT set a check engine light. It will set a "soft code" (the code is stored in the computer) but no check engine light will be turned on.
- Features a BulletProof Water Pump
- Hayden Mechanical Fan Clutch
- BulletProof Fan Clutch Adapter
- This product will set a "soft-code" in the computer, but will NOT trigger the Check Engine light.
*The only way to TRULY know if you have the 90mm or 100mm water pump on your Ford 6.0L is to measure it*
If you have a 2003 you are in the 2003-2004.25 production date, and most likely a 90mm water pump.
If you have a 2005 or newer, you most likely have the 100mm water pump.
If you have a 2004 model you need to check your VIN code to determine your production date.