Probes and Accessories

Protect your wiring from the open elements and provide a cleaner look when removing emissions components with Shibby Engineering's tuner harness plug kit for your 2016-2019 Nissan Titan XD Diesel.

Protect your wiring from the open elements and provide a cleaner look when removing emissions components with Mel's manufacturers tuner harness plug kit for your 2020+ 6.7L Ford Powerstroke Diesel.

Protect your wiring from the open elements and provide a cleaner look when removing emissions components with Mel's manufacturers tuner harness plug kit for your 2017-2020 6.7L & 2018-2020 3.0L Ford Powerstroke

Protect your wiring from the open elements and provide a cleaner look when removing emissions components with Mel's manufacturers tuner harness plug kit for your 2016-2019 GMC/Chevy Colorado/Canyon 2.8L Diesel.

Protect your wiring from the open elements and provide a cleaner look when removing emissions components with Mel's manufacturers tuner harness plug kit for your 2017-2022 L5P Duramax 6.6L Diesel.

Monitor your EGT/Pyro temps on your Bully Dog GT or Watchdog tuner with the Bully Dog Sensor Docking Station. Pyro probe included. Also compatible with H&S Mini Maxx tuners.

Replacement pyrometer thermocouple probe for the Bullydog Sensor Docking Stations (pyrometer) used in the Triple Dog GT and other modern Bullydog tuners.

The SCT EGT Sensor Kit allows you to monitor exhaust gas temperatures with your SCT devices. This sensor is plug & play and easy to install, featuring a stainless steel EGT probe and is RFI-shielded for accurate monitoring.

1998.5-2024 Dodge Ram 5.9/6.7L Cummins - This is a replacement pyrometer/thermocouple probe for the Smarty SG2 / Raceme Ultra digital monitor.

Control your RaceME Ultra, EFILive, or other compatible modules connected to your 2006-2016 Dodge Cummins truck with SoCal Diesel's CSP5 (Cummins Switchable Tuning - 5 power levels) switch. The pass through style configuration allows you to connect other OBD-II-based products while still maintaining use of the CSP5 switch.

Control your RaceME Ultra, EFILive, or other compatible modules connected to your 2006-2016 Dodge Cummins truck with SoCal Diesel's CSP5 (Cummins Switchable Tuning - 5 power levels). This 90 degree cable connects neatly and discreetly to the truck's OBD-II diagnostic port.

Unlock the potential of your 2018-2021 Dodge Ram 1500 3.0L Eco Diesel with BC Diesel's Unlock Cable

Unlock the potential of your 2018-2021 Dodge Cummins 6.7L diesel truck with the Bully Dog Cummins ECM unlock cable - for use with Bully Dog BDX Diesel performance tuners.

Unlock the potential of your 2013-2017 Dodge Cummins 6.7L diesel truck with the Bully Dog/H&S Cummins ECM unlock cable - for use with Bully Dog GT Diesel and H&S Mini Maxx performance tuners.

Unlock the potential of your 2018-2021 Dodge Cummins 6.7L diesel truck with the Bully Dog/H&S Cummins bypass cable - for use with Bully Dog GT Diesel and H&S Mini Maxx performance tuners.

The FISH Tuning Bypass Cable for the Dodge Ram is a must-have for any 18+ Cummins. It allows you to bypass the Security Gateway Module. It works in multiple ways for multiple platforms.

CSP5 switch to manage your EFI Live or MPVI2/MPVI3 tunes, you can seamlessly switch tunes on the fly.

Edge Products' backup camera is designed to work with their CTS/CTS2 monitors which have a built-in video port allowing you to connect Edge's state-of-the-art back-up camera. The CTS/CTS2's high resolution color screen allows users to easily see what's going on behind them. This back-up camera option is a must have for towers and safety-conscious drivers.

Edge Products' backup camera is designed to work with their CTS3 monitors which have a built-in video port allowing you to connect Edge's state-of-the-art back-up camera. The CTS3's high resolution color screen allows users to easily see what's going on behind them. This back-up camera option is a must have for towers and safety-conscious drivers

The Edge accessory (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories (such as temperature/pressure sensors, turbo timer, etc.) via daisy-chain style to Edge's CS/CTS/CS2/CTS2 systems. This kit is the starter cable that is required if you do not have a Juice CS/CTS2.

Edge Products EAS Power Switch w/ Starter Kit is a great upgrade on purchasing a CTS2 or CTS3 for your truck.

2006 - 2012 Dodge Cummins

Universal - Monitor data such as Boost PSI, Fuel Rail Pressure, Air Bag Pressure, Lift Pump Pressure, Pre/Post Intercooler Pressure and many more. Plugs directly into Edge’s Accessory System (EAS) for direct monitoring with your CTS/CTS2 display monitor. The EAS Universal Sensor Input kit is required for installation (Not included).

The Edge EAS Temperature Sensor is a -40°F to 300°F 1/8” NPT sensor & wire assembly supplied with the connectors to plug directly into Edge’s Accessory System (EAS) for direct monitoring with your CTS/CTS2 display monitor. The EAS Universal Sensor Input kit is required for installation (Not included).

The EAS Universal Sensor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS/CTS/CS2/CTS2. This means you can add custom temperature, pressure, Air/Fuel and even Travel/Position gauges!

Universal (Except 2006-2012 Dodge Applications)

The Edge accessory (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy-chain style to Edge's CS2/CTS2 products. A starter kit (standard with Juice CS2/CTS2 kits, optional with all others) is required to install this pyrometer.

Edge's EAS Expandable EGT Probe allows you to monitor exhaust gas temperatures with your CS/CTS/CS2/CTS2 product line. The EAS is designed to allow you to add optional expandable accessories from Edge Products such as pressure and temp sensors. This re-designed version of the original EAS Starter Kit EGT Probe, is built with a 15" lead so that the EGT Probe can be easily replaced, or removed without needing to replace the cable or other electronics.

Universal

2013-2018 Dodge 6.7L Cummins - This unlock cable is designed for use with existing Edge Insight CTS2's on 2013+ Dodge applications. If you have an existing Insight CTS2 (PN 84130), you will need to purchase this cable and contact Edge to update your device.

This unlock cable is designed for use with existing EZ Lynk 2 for your Dodge 6.7L pickup.

2018-2020 Dodge 6.7L Cummins - This unlock cable is designed for use with existing EZ Lynk 2.0 on 2018-2020 Dodge applications.

2016-2019 Nissan Titan XD - This unlock cable is designed for use with existing EZ Lynk on 2016-2019 Nissan Titan Diesel applications.

Replacement power cable that is used for switched power connections. This cable can be used with any Bully Dog, H&S Mini Maxx or Black Maxx tuners.

Replacement OBD-II junction/control box for any Bully Dog, H&S Mini Maxx or Black Maxx tuners.

Edge Products OBD-II to HDMI Cable

Replacement high-speed data HDMI cable that is connected between the OBD-II control box and the back of the tuner. This cable can be used with any BullyDog, H&S Mini Maxx or Black Maxx tuners.

Do you have two accessories fighting for your OBD-II diagnostic port? If so, use this Plug-n-Play Pass-Through Wiring Harness as a splitter so that you can use both at the same time.

Daystar's NO FLASH PLUGS provide an effective way to preserve the tune on your diesel or other custom tuned ride. Protect your custom tune with Daystar!

2010-2021 Dodge 6.7L / 2016+ Nissan Titan XD 5.0L Cummins - Shift tunes on-the-fly with your EFILive or EZ Lynk tuning with this control switch kit. Tuning device not included.