Programmeurs & Displays

Universal - Monitor data such as Boost PSI, Fuel Rail Pressure, Air Bag Pressure, Lift Pump Pressure, Pre/Post Intercooler Pressure and many more. Plugs directly into Edge’s Accessory System (EAS) for direct monitoring with your CTS/CTS2 display monitor. The EAS Universal Sensor Input kit is required for installation (Not included).

The Edge EAS Temperature Sensor is a -40°F to 300°F 1/8” NPT sensor & wire assembly supplied with the connectors to plug directly into Edge’s Accessory System (EAS) for direct monitoring with your CTS/CTS2 display monitor. The EAS Universal Sensor Input kit is required for installation (Not included).

The EAS Universal Sensor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS/CTS/CS2/CTS2. This means you can add custom temperature, pressure, Air/Fuel and even Travel/Position gauges!

Universal (Except 2006-2012 Dodge Applications)

The Edge accessory (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy-chain style to Edge's CS2/CTS2 products. A starter kit (standard with Juice CS2/CTS2 kits, optional with all others) is required to install this pyrometer.

Edge's EAS Expandable EGT Probe allows you to monitor exhaust gas temperatures with your CS/CTS/CS2/CTS2 product line. The EAS is designed to allow you to add optional expandable accessories from Edge Products such as pressure and temp sensors. This re-designed version of the original EAS Starter Kit EGT Probe, is built with a 15" lead so that the EGT Probe can be easily replaced, or removed without needing to replace the cable or other electronics.

Universal

2013-2018 Dodge 6.7L Cummins - This unlock cable is designed for use with existing Edge Insight CTS2's on 2013+ Dodge applications. If you have an existing Insight CTS2 (PN 84130), you will need to purchase this cable and contact Edge to update your device.

This unlock cable is designed for use with existing EZ Lynk 2 for your Dodge 6.7L pickup.

Replacement power cable that is used for switched power connections. This cable can be used with any Bully Dog, H&S Mini Maxx or Black Maxx tuners.

Replacement OBD-II junction/control box for any Bully Dog, H&S Mini Maxx or Black Maxx tuners.

Replacement high-speed data HDMI cable that is connected between the OBD-II control box and the back of the tuner. This cable can be used with any BullyDog, H&S Mini Maxx or Black Maxx tuners.

The Mirror-Mate allows you to install the Bully Dog GT or WatchDog just below the rear view mirror for easy access and viewing and a clean look. The custom T-Slot adapter is designed to work specifically with the GT or WatchDog.

2010-2021 Dodge 6.7L / 2016+ Nissan Titan XD 5.0L Cummins - Shift tunes on-the-fly with your EFILive or EZ Lynk tuning with this control switch kit. Tuning device not included.

Used with Bullydog Mirror-Mate Mounting Kits for proper wiring extension

Convient à tous les camions équipés Dodge, Ford et GM

EZ LYNK OBDII Diagnostic Cable with 18+ RAM SGM Adapter Auto Agent 3. Designed for your 2018 and up RAM 2500/3500 Trucks.

Shibby's SOTF CCV Harness Tuning Cap Plug for your 2010-2020 6.7 Cummins diesel.

Shibby's EBP Harness Plug for your 2007.5-2020 6.7L Cummins truck.

Bully Dog's BDX Windshield Mount is not your average device mount. The mount's heavy duty suction cup base securely adheres to windshield glass while 4 ultra-strong neodymium magnets ensure your BDX device stays front-and-center, no matter what terrain you're on.

Fits all Edge CS/CTS/CS2/CTS2 products

Fits All Edge Mounts to Adapt Larger Color Touch Screen Version 3 (CS/CTS2 to CTS3)

Permanently mount your RaceMe unit on the pillar in your cab of your 2010-2018 Dodge Ram truck, you no longer need to use the suction cup or pick your unit up off the floor.