Systèmes d'injection de fuel

OEM Motorcraft fuel pump for your 2008-2010 Ford 6.4L Powerstroke diesel pickup.

OEM Motorcraft fuel pump for your 2011-2016 Ford 6.7L Powerstroke diesel pickup.

The easy 30 minute install of the new updated "Blue Spring" on 2003-2007 Ford Powerstroke 6.0L diesels will increase your fuel pressure back up to where it should be from the factory. Most 6.0's see an increase of 10 psi of fuel pressure.

Purchase the XDP OER Series Fuel Contamination Kit XD529 and get your 2013-2018 Ram 6.7L Diesel 2500/3500 pickup back on the road. The fuel system in your Ram is known to be reliable and dependable, but one bad tank of fuel can cause significant damage. A fuel system flush will not guarantee that all the impurities have been eliminated

Go back to a simpler time, when things worked and you could rely on your Duramax fuel system. Since the introduction of the common rail fuel system in 2001, all Duramax Engines were equipped with a reliable Bosch CP3 high pressure fuel pump. Then in 2011, GM made major changes and switched to a Bosch CP4 pump which has seen its share of problems!

Fleece Performance CP3K Pump for your 2003-2007 Cummins truck.

Fleece Performance CP3K Pump for your 2007.5-2018 Cummins truck.

Fleece Performance CP3K Pump for your 2001-2016 LB7/LLY/LBZ/LMM/LML Duramax truck.

Your 2011-2016 GMC/Chevy 6.6L Duramax truck stock CP4 pump is only capable of supporting 500 rwhp, upgrade to a Fleece Performance CP3K capable of supporting up to 600 rwhp.

Your 2011-2016 GMC/Chevy 6.6L Duramax truck stock CP4 pump is only capable of supporting 500 rwhp, upgrade to a Fleece Performance CP3, requires no tuning changes and maintains all factory emissions controls.

Fleece Performance LML CP3 conversion kit without pump, a customizable way to convert the fuel system in your GM/Chevy 6.6L Duramax 2011-2016 from a CP4 to a CP3. A no tuning required solution.

The PowerFlo 1000 high performance 12mm stroker CP3 pump for the 2003-2007 5.9L Cummins is capable of supporting up to 1,000+ RWHP.

The PowerFlo 1000 high performance 12mm stroker CP3 pump for the 2007.5-2018 6.7L Cummins is capable of supporting up to 1,000+ RWHP

Fleece Performance's 750 CP3 pump allows you to maintain desired fuel rail pressure through your entire RPM range and provide enough fuel to support 750 rear wheel horsepower in your 2003-2007 5.9L Cummins truck.

Fleece Performance's 750 CP3 pump allows you to maintain desired fuel rail pressure through your entire RPM range and provide enough fuel to support 750 rear wheel horsepower in your 2006-2010 6.6L Duramax truck.

The Fleece FPE-PF-CUMM-98-12V PowerFlo Lift Pump that is a complete fuel supply upgrade kit for your 1998 Dodge Ram 5.9L 3500 12V Diesel. The PowerFlo Lift Pump is a factory replacement performance lift pump from the diesel experts at Fleece Performance.

The Fleece Performance PowerFlo sending unit will help your truck get the maximum flow from the aftermarket lift pump in your 1991-1997 Cummins diesel pickup.

The Fleece Performance PowerFlo sending unit will help your truck get the maximum flow from the aftermarket lift pump in your 1991-1997 Cummins diesel pickup.

The Fleece Performance SureFlo sending unit will help your truck get the maximum flow from the aftermarket lift pump in your 1998.5-2002 Cummins diesel pickup.

The Fleece Performance SureFlo sending unit will help your truck get the maximum flow from the aftermarket lift pump in your 2003-2004 Cummins diesel pickup.

The Fleece Performance SureFlo sending unit will help your truck get the maximum flow from the aftermarket lift pump in your 2005-2009 Cummins diesel pickup.

The Fleece Performance SureFlo sending unit will help your truck get the maximum flow from the aftermarket lift pump in your 2010 Cummins diesel pickup.

The Fleece Performance SureFlo sending unit will help your truck get the maximum flow from the aftermarket lift pump in your 2011-2021 Cummins diesel pickup.

The Fleece Performance SureFlo sending unit will help your truck get the maximum flow from the aftermarket lift pump in your 2004.5-2010 GM diesel pickup.

The Fleece Performance SureFlo sending unit will help your truck get the maximum flow from the aftermarket lift pump in your 2011-2016 GM long bed diesel pickup.

The Fleece Performance SureFlo sending unit will help your truck get the maximum flow from the aftermarket lift pump in your 2011-2016 GM short bed diesel pickup.

Replace your leaking transmission lines for your 2015-2016 GMC/Chevy 6.6L LML 2500/3500HD Duramax truck.

The XDP OER Series Fuel Transfer Pump XD519 is a quality replacement for the failing pump in your 1994-1998 Dodge 5.9L Diesel. This pump draws fuel from the fuel tank to deliver fuel to the P7100 fuel injection pump, which in turn feeds the fuel injectors.

The XDP OER Series Remanufactured CP4 Fuel Pump XD609 is a high-quality replacement for the failed or underperforming injection fuel pump on your 2011-2016 GM 6.6L Duramax LML/LGH.

The XDP Remanufactured CP3 Fuel Pump XD598 will get your 2007.5-2018 Dodge Ram 6.7L Diesel back on the road. A failed or poorly functioning CP3 pump can create low fuel rail pressure which can cause power loss, no start conditions, or even leave you stranded.

Genuine Motorcraft OEM high pressure oil pump cover gasket for your 6.0L Powerstroke diesel.

Make installing the high pressure fuel pump in your 2008-2010 Ford 6.4L Powerstroke a breeze with the Motorcraft install kit.

A new fuel pressure regulator will fix the common surging and lopey idle that many high mileage Duramax owners have experienced. This is a direct OEM replacement for 2006-2010 GMC Chevy Duramax 6.6L LBZ and LMM diesels with the Bosch CP3 injection pump.

The Industrial Injection disaster kit contains everything needed to repair your 6.7L's fuel system in the event of a catastrophic failure. When the CP4 fails it will shed metal shavings into your fuel system, it doesn't take long to flow throughout the whole system and cause some serious damage, if you find yourself in this position this is the kit for you!

The Industrial Injection disaster kit contains everything needed to repair your 6.7L's fuel system in the event of a catastrophic failure. When the CP4 fails it will shed metal shavings into your fuel system, it doesn't take long to flow throughout the whole system and cause some serious damage, if you find yourself in this position this is the kit for you!

The Industrial Injection 3GE101 Disaster Kit is an all-inclusive kit to replace all the contaminated fuel system components in your 2016-2020 Ford 6.7L Powerstroke. When the C4 pump fails, it can distribute debris throughout the entire fuel system.

The Industrial Injection 3GH101 Disaster Kit includes everything you need to get your 2020-2022 Ford 6.7L Powerstroke back on the road. Internal pump debris is frequently forced through the fuel system on your engine when the CP4 pump in your 6.7L Powerstroke fails.

The Industrial Injection disaster kit contains everything needed to repair your LML's fuel system in the event of a catastrophic failure. When the CP4 fails it will shed metal shavings into your fuel system, it doesn't take long to flow throughout the whole system and cause some serious damage, if you find yourself in this position this is the kit for you!

The S&B Tanks 86-1001 Fuel Sending Unit makes installing an aftermarket ligt pump a breeze in your Crew Cab, Long Box 2017-2022 Ford 6.7L Pickup truck. Aftermarket lift pumps often come with a draw straw that can cause issues at a 1/4" tank fuel level. This plug & play sending unit allows the lift pump to drive to empty without the need of modifying your stock or aftermarket tank.

The S&B Tanks 86-1000 Fuel Sending Unit makes installing an aftermarket ligt pump a breeze in your Crew Cab, Short Box 2017-2022 Ford 6.7L Pickup truck. Aftermarket lift pumps often come with a draw straw that can cause issues at a 1/4" tank fuel level. This plug & play sending unit allows the lift pump to drive to empty without the need of modifying your stock or aftermarket tank.